Jeti Phasor Race 2014G Competition Motors
$ 270.00
* Instruction Manual (.pdf)
The Phasor Race design represents the best combination of high performance and durability. The whole line of Jeti Phasor motors targets mainly professionals and competition FAI F5B, F5F, F5J pilots looking for uncompromised precision and quality. The Jeti motors are made using 20mm, 4-pole rotors wrapped in Kevlar and designed to withstand up to 70,000 RPM. The stators have been built using our thinnest lamination for the highest possible efficiency in this category of motors.
The high efficiency planetary gearbox comes equipped with a special planetary gear which is designed for the highest durability and smooth performance.
| Race 2014 Series | 10400 1D | 6800 1.5D | 5100 2D |
|---|---|---|---|
| Kv (rpm/V) | 10400 | 6800 | 5100 |
| Max Continuous Power (W) | 750W | 750W | 750W |
| Max Amp (5sec) | 240A | 180A | 120A |
| Max Efficiency | 93% | 93% | 93% |
| Io (No load A) | 10A | 7.8A | 5.3A |
| Rm (Resistance) | 0.0023Ohm | 0.0054Ohm | 0.0099Ohm |
| Shaft Diameter | 6mm | 6mm | 6mm |
| Gearbox | 6.75:1 | 6.75:1 | 6.75:1 |
| Motor Diameter | 38mm | 38mm | 38mm |
| Motor Length | 67mm | 67mm | 67mm |
| Motor Weight | 220g | 220g | 220g |
| Built in Fan | N/A | N/A | N/A |
| Max Rpm | 70,000 | 70,000 | 70,000 |
| Poles | 4 | 4 | 4 |
| Case | Smooth | Smooth | Smooth |
| ESC Timing | 8-12 deg | 8-12 deg | 8-12 deg |
| ESC Switching Freq. | 8-12kHz | 8-12kHz | 8-12kHz |
| Model type | Model name | Motor | Controller | Battery | Prop |
|---|---|---|---|---|---|
| Sailplane 3-3.5m | Pulsar 3.2/3.6E | 5100/1D 6.7:1 | Jeti Spin Pro 80 | 3300 3S Li-poly | 16x8 Folding |
| Hotliner F5B | Enigma F5B | 5100/1D 6.7:1 | Jeti Spin Pro 160 | 4400 3S Li-poly | 15x10 Folding |
| Sailplane 3-3.5m | Pulsar 3.2/3.6E | 3600/1.5D 6.7:1 | Jeti Spin Pro 100 | 3300 2S Li-poly | 17x8 Folding |
| Hotliner F5B | Speedfire F5B | 3600/1.5D 6.7:1 | Jeti Spin Pro 160 | 3300 3S Li-poly | 13x8 Folding |
Jeti Phasor Race 2026G Competition Motors
$ 320.00
* Instruction Manual (.pdf)
The Phasor Race design represents the best combination of high performance and durability. The whole line of Jeti Phasor motors targets mainly professionals and competition FAI F5B, F5F, F5J pilots looking for uncompromised precision and quality. The Jeti motors are made using 20mm, 4-pole rotors wrapped in Kevlar and designed to withstand up to 70,000 RPM. The stators have been built using our thinnest lamination for the highest possible efficiency in this category of motors.
The high efficiency planetary gearbox comes equipped with a special planetary gear which is designed for the highest durability and smooth performance.
| Race 2026 Series | 5500 1D | 3600 1.5D | 2700 2D |
|---|---|---|---|
| Kv (rpm/V) | 5500 | 3600 | 2700 |
| Max Continuous Power (W) | 1100W | 1100W | 1100W |
| Max Amp (15sec) | 240A | 180A | 120A |
| Max Efficiency | 93% | 93% | 93% |
| Io (No load A) | 7.2A | 5.1A | 3.8A |
| Rm (Resistance) | 0.0030Ohm | 0.0067Ohm | 0.0112Ohm |
| Shaft Diameter | 6mm | 6mm | 6mm |
| Gearbox | 6.75:1 | 6.75:1 | 6.75:1 |
| Motor Diameter | 38mm | 38mm | 38mm |
| Motor Length | 79mm | 79mm | 79mm |
| Motor Weight | 298g | 298g | 298g |
| Built in Fan | N/A | N/A | N/A |
| Max Rpm | 70,000 | 70,000 | 70,000 |
| Poles | 4 | 4 | 4 |
| Case | Smooth | Smooth | Smooth |
| ESC Timing | 8-12 deg | 8-12 deg | 8-12 deg |
| ESC Switching Freq. | 8-12kHz | 8-12kHz | 8-12kHz |
| Model type | Model name | Motor | Controller | Battery | Prop |
|---|---|---|---|---|---|
| Sailplane 3.5m | Pulsar 3.2/3.6E | 5500/1D 6.7:1 | Jeti Spin Pro 100 | 3300 3S Li-poly | 16x8 Folding |
| Hotliner F5B | Enigma F5B | 5500/1D 6.7:1 | Jeti Spin Pro 160 | 4400 4S Li-poly | 17x17 Folding |
| Sailplane 3-3.5m | Pulsar 3.2/3.6E | 3600/1.5D 6.7:1 | Jeti Spin Pro 100 | 3300 4S Li-poly | 17x8 Folding |
| Hotliner F5B | Speedfire F5B | 3600/1.5D 6.7:1 | Jeti Spin Pro 160 | 3300 6S Li-poly | 17x18 Folding |
| Sailplane 3-3.5m | Stork E | 2700/2D 6.7:1 | Jeti Spin Pro 80 | 3300 4S Li-poly | 18x11 Folding |
| Pattern .60 | Inspire 60 | 2700/2D 6.7:1 | Jeti Spin Pro 99 | 3900 6S Li-poly | 16x10 APC-E |
Jeti Phasor Race 2035G Competition Motors
$ 370.00
* Instruction Manual (.pdf)
The Phasor Race design represents the best combination of high performance and durability. The whole line of Jeti Phasor motors targets mainly professionals and competition FAI F5B, F5F, F5J pilots looking for uncompromised precision and quality. The Jeti motors are made using 20mm, 4-pole rotors wrapped in Kevlar and designed to withstand up to 70,000 RPM. The stators have been built using our thinnest lamination for the highest possible efficiency in this category of motors.
The high efficiency planetary gearbox comes equipped with a special planetary gear which is designed for the highest durability and smooth performance.
| Race 2035 Series | 4100 1D | 2700 1.5D | 2100 2D |
|---|---|---|---|
| Kv (rpm/V) | 4100 | 2700 | 2100 |
| Max Continuous Power (W) | 1400W | 1400W | 1400W |
| Max Amp (15sec) | 240A | 180A | 120A |
| Max Efficiency | 93% | 93% | 93% |
| Io (No load A) | 6.8A | 3.7A | 2A |
| Rm (Resistance) | 0.0033Ohm | 0.0080Ohm | 0.0131Ohm |
| Shaft Diameter | 6mm | 6mm | 6mm |
| Gearbox | 6.75:1 | 6.75:1 | 6.75:1 |
| Motor Diameter | 38mm | 38mm | 38mm |
| Motor Length | 88mm | 88mm | 88mm |
| Motor Weight | 355g | 355g | 355g |
| Built in Fan | N/A | N/A | N/A |
| Max Rpm | 70,000 | 70,000 | 70,000 |
| Poles | 4 | 4 | 4 |
| Case | Smooth | Smooth | Smooth |
| ESC Timing | 8-12 deg | 8-12 deg | 8-12 deg |
| ESC Switching Freq. | 8-12kHz | 8-12kHz | 8-12kHz |
| Model type | Model name | Motor | Controller | Battery | Prop |
|---|---|---|---|---|---|
| Sailplane 3.5-4m | Pulsar 3.6/4E | 4100/1D 6.7:1 | Jeti Spin Pro 80 | 3300 3S Li-poly | 18x10 Folding |
| Hotliner F5B | Enigma F5B | 4100/1D 6.7:1 | Jeti Spin Pro 160 | 3300 5S Li-poly | 17x18 Folding |
| Sailplane 3.5-4m | Pulsar 3.6/4E | 2700/1.5D 6.7:1 | Jeti Spin Pro 100 | 3300 4S Li-poly | 19x10 Folding |
| Hotliner F5B | Speedfire F5B | 2700/1.5D 6.7:1 | Jeti Spin Pro 160 | 3300 8S Li-poly | 18x18 Folding |
| Hotliner F5B | Avionik F5B | 2100/2D 6.7:1 | Jeti Spin Pro 160 | 1800 10S Li-poly | 18x19 Folding |
| Pattern .60 | Inspire 60 | 2100/2D 6.7:1 | Jeti Spin Pro 99 | 3900 8S Li-poly | 15x10 APC-E |
| Aerobatic/3D .90 | Extra 330 3DHS | 2100/2D 6.7:1 | Jeti Spin Pro 99 | 3900 6S Li-poly | 19x8 APC-E |
X-Nova Motors 4020 OEM Shafts
$ 9.99
Original X-Nova Motors replacement Motor shaft
For more specific information about which bearings are right for your Xnova motor click here.
X-nova OEM Bearings - 1-Bearing-set 4020 series (2)
$ 16.99
Original X-nova replacement bearings - Pack of 2
For more specific information about which bearings are right for your Xnova motor click here.
X-nova OEM Bearings - 1-Bearing-set 4025 to 4535 series (3)
$ 24.99
Original X-nova replacement bearings (pack of 3)
For more specific information about which bearings are right for your Xnova motor click here.
Xnova 1806-2300KV FPV 4 Motor Combo
$ 95.00
Xnova 1806-2300KV supersonic racing FPV motor combo
- High performance and finest CNC quality
- Ultimate efficiency
- Low cogging torque and smooth running
- Precise balanced and fully tested
- 100% hand wound
- 3.5mm Shaft
| Motor Type | RM 1806-2300kv |
|---|---|
| No-load current (@10V) | 0.7A |
| Weight (not including 60mm wires) | 21g |
| Li-Po cells | 3-4s |
| Resistance (including 60mm wires) | 0.120Ω |
Xnova 2204-2300KV FPV 4 Motor Combo
$ 100.00
Xnova 2204-2300KV supersonic racing FPV motor combo
Xnova 2204-2600KV FPV 4 Motor Combo
$ 100.00
Xnova 2204-2600KV supersonic racing FPV motor combo
Xnova 2206-2000KV FPV 4 Motor Combo
$ 118.00
Xnova 2206-2000KV supersonic racing FPV motor combo
- High performance and finest CNC quality
- Ultimate efficiency
- Low cogging torque and smooth running
- Precise balanced and fully tested
- 100% handwound
- 3.5mm Shaft
| Motor Type | RM 2206-2000kv |
|---|---|
| No-load current (@10V) | 0.9A |
| Weight (not including 60mm wires) | 36g |
| Li-Po cells | 3-4s |
| Resistance (including 60mm wires) | 0.070Ω |
Xnova 2206-2300KV FPV 4 Motor Combo
$ 118.00
Xnova 2206-2300KV supersonic racing FPV motor combo
- High performance and finest CNC quality
- Ultimate efficiency
- Low cogging torque and smooth running
- Precise balanced and fully tested
- 100% hand wound
- 3.5mm Shaft
| Motor Type | RM 2206-2300kv |
|---|---|
| No-load current (@10V) | 1.2A |
| Weight (not including 60mm wires) | 36g |
| Li-Po cells | 3-4s |
| Resistance (including 60mm wires) | 0.050Ω |
Xnova 2216 Series- 2600 KV
$ 85.00
Xnova XTS 2216-2600kv 6P
FOR ESC SETTINGS CLICK HERE 
Features:
- High quality Neodymium Magnets with a heat resistance up to 150 degree C.
- Specialized wires,heat resistance up to 250 degree C.
- Precise balanced.
- High performance stator metal sheet.
- High quality NMB bearings.
- Marked leading high efficiency up to 86%.
- Superb quality and machining of CNC parts.
- Improved torque and power output.
SHAFT TYPE SELECTION BASED ON THE FOLLOWING TYPES A
Technical Data
Xnova 2216 Series- 4100 KV
$ 85.00
Xnova XTS 2216-4100kv 6P
FOR ESC SETTINGS CLICK HERE
Features:
- High quality Neodymium Magnets with a heat resistance up to 150 degree C.
- Specialized wires,heat resistance up to 250 degree C.
- Precise balanced.
- High performance stator metal sheet.
- High quality NMB bearings.
- Marked leading high efficiency up to 88%.
- Superb quality and machining of CNC parts.
- Improved torque and power output.
SHAFT TYPE SELECTION BASED ON THE FOLLOWING TYPES A
Technical Data
Xnova 3215 Series 380 Size - 930KV TAREQ SPECIAL EDITION
$ 150.00
Xnova 3215 Series 380 Size - 930KV TAREQ SPECIAL EDITION 10P
Xnova brushless high performance outrunner motor designed for EXTREME 3D flying AND still good flight times, specially made for your 380 size helicopter, like SAB Goblin or MSH Protos 380, where highest power to weight ratio is important. We carefully optimized and tested this Motor with TAREQ ALSAADI under extreme conditions.
FOR ESC SETTINGS CLICK HERE
Features:
- High qual. Neodym Mag.heat res. up to 150 degree C.
- Specialized wires,heat resistance up to 250 degree C.
- Precise balanced.
- High performance stator metal sheet.
- Very large High quality NMB bearings.
- Marked leading high efficiency up to 91%.
- Cooler running.
- Superb quality and machining of CNC parts.
- Handwound single strand wire.
SHAFT TYPE SELECTION BASED ON THE ILLUSTRATION BELOW A
Technical Data:
Xnova 4020 Series 1000KV
$ 185.00
Xnova 4020-1000KV 2Y
Xnova brushless high performance outrunner motor for 480-600 helicopters on 6S up to 8S setups. Excellent choice for Goblin 500, Logo 480, Gaui X5 or Synergy E5. The motor choice in between power and long flight time.
FOR ESC SETTINGS CLICK HERE 
Features:
- High quality Neodymium Magnets with a heat resistance up to 150 degree C.
- Specialized wires,heat resistance up to 250 degree C.
- Precise balanced.
- High performance stator metal sheet.
- Optimized ventilation.
- High quality NMB bearings.
- Marked leading high efficiency up to 92%.
- Superb quality and machining of CNC parts.
- 100% hand-wound.
SHAFT TYPE SELECTION BASED ON THE FOLLOWING TYPES A, B & C
Technical Data
Xnova 4020 Series 1200KV
$ 185.00
Xnova 4020-1200KV 2Y
Xnova brushless high performance outrunner motor for 480-600 helicopters on 6S up to 8S setups. Excellent choice for Goblin 500, Logo 480, Gaui X5 or Synergy E5. The motor choice in between power and long flight time.
FOR ESC SETTINGS CLICK HERE
Features:
- High quality Neodymium Magnets with a heat resistance up to 150 degree C.
- Specialized wires,heat resistance up to 250 degree C.
- Precise balanced.
- High performance stator metal sheet.
- Optimized ventilation.
- High quality NMB bearings.
- Marked leading high efficiency up to 92%.
- Superb quality and machining of CNC parts.
- 100% hand-wound.
SHAFT TYPE SELECTION BASED ON THE FOLLOWING TYPES A, B & C
Technical Data
Xnova 4025 Series 1120KV
$ 220.00
Xnova 4025-1120KV 1.5Y
Xnova brushless high performance outrunner motor for 550-620 helicopters for 6S Extreme 3D. Excellent choice for Goblin 570, Logo 500 - 600, Synergy E5 - E6 or T-REX 600.
FOR ESC SETTINGS CLICK HERE
Features:
- High quality Neodymium Magnets with a heat resistance up to 150 degree C.
- Specialized wires,heat resistance up to 250 degree C.
- Precise balanced.
- High performance stator metal sheet.
- Optimized ventilation.
- High quality NMB bearings.
- Marked leading high efficiency up to 92%.
- Superb quality and machining of CNC parts.
- 100% hand-wound.
SHAFT TYPE SELECTION BASED ON THE FOLLOWING TYPES A, B, C
If V3 version is stated on the packing and engrave on fancover = new front case (please see datasheet)
Technical Data
Xnova 4025 Series 560KV
$ 220.00
Xnova 4025-560KV 3Y
Xnova brushless high performance outrunner motor for 550-620 helicopters on 8S up to 10S setups. Excellent choice for Goblin 570, Logo 500 - 600, Synergy E5 - E6 or T-REX 600. Peak efficiency occurs at ~50A on 8s.
FOR ESC SETTINGS CLICK HERE
Features:
- High quality Neodymium Magnets with a heat resistance up to 150 degree C.
- Specialized wires,heat resistance up to 250 degree C.
- Precise balanced.
- High performance stator metal sheet.
- Optimized ventilation.
- High quality NMB bearings.
- Marked leading high efficiency up to 92%.
- Superb quality and machining of CNC parts.
- 100% hand-wound.
SHAFT TYPE SELECTION BASED ON THE FOLLOWING TYPES A, B
If V3 version is stated on the packing and engrave on fancover = new front case (please see datasheet)
Technical Data
Xnova 4025 Series 670KV
$ 220.00
Xnova 4025-670KV 2.5Y
Xnova brushless high performance outrunner motor for 550-620 helicopters for sport flying on 6-8S or Extreme 3D on 8-10S setups. Excellent choice for Goblin 570, Logo 500 - 600, Synergy E5 - E6 or T-REX 600.
FOR ESC SETTINGS CLICK HERE
Features:
- High quality Neodymium Magnets with a heat resistance up to 150 degree C.
- Specialized wires,heat resistance up to 250 degree C.
- Precise balanced.
- High performance stator metal sheet.
- Optimized ventilation.
- High quality NMB bearings.
- Marked leading high efficiency up to 92%.
- Superb quality and machining of CNC parts.
- 100% hand-wound.
SHAFT TYPE SELECTION BASED ON THE FOLLOWING TYPES A, B, C
If V3 version is stated on the packing and engrave on fancover = new front case (please see datasheet)
Technical Data
Xnova 4025 Series 830KV
$ 220.00
Xnova 4025-830KV 2Y
Xnova brushless high performance outrunner motor for 550-620 helicopters for sport flying on 6-8S or Extreme 3D on 8-10S setups. Excellent choice for Goblin 570, Logo 500 - 600, Synergy E5 - E6 or T-REX 600.
FOR ESC SETTINGS CLICK HERE
Features:
- High quality Neodymium Magnets with a heat resistance up to 150 degree C.
- Specialized wires,heat resistance up to 250 degree C.
- Precise balanced.
- High performance stator metal sheet.
- Optimized ventilation.
- High quality NMB bearings.
- Marked leading high efficiency up to 92%.
- Superb quality and machining of CNC parts.
- 100% hand-wound.
SHAFT TYPE SELECTION BASED ON THE FOLLOWING TYPES A, B, C
If V3 version is stated on the packing and engrave on fancover = new front case (please see datasheet)
Technical Data
| Slots & Poles | 24n8p |
| Winding T | 2Y |
| rpm/V | 830 |
| Volt (V) | 10 | 20 | 30 |
| Io(A) | 1.5 | 2.3 | 3.3 |
| Rm (mohm) | 11 | 11 | 11 |
| Weight (without connector) (g) | 386 |
| Body Length (no shaft) mm | 55.75 |
| Diameter (mm) | 49.5 |
| Shaft Length (mm) (Details pictures) | 36 / 25 / 32 |
| Shaft Dia. (mm) | 6 / 5 |
| Mounting Holes CTC Distance (mm) | NEW! from V3 = 4*M3 in 25mm and 4*M4 in 30mm |
| Mounting Screw | NEW! from V3 = M3 and M4 |
| Max Eff. Curr. | 36.93 | 64.67 | 94.87 |
| Max Eff. | 91.88 | 92.89 | 94.87 |
| Kt (Nm/A | 0.0115 |
| Km (Nm/sqrt(w)) | 0.1097 |
| Max Continuous Power(Watts) | 3000 |
| Peak Continuous Power(Watts) (5 sec) | 4000 |
| Max cont. current (A) | 98 |
Xnova 4030 Series-350KV
$ 245.00
Xnova 4030-350KV 4Y
Xnova brushless high performance outrunner motor for 600-700 helicopters for 10-12S helicopters where power draw is very consistent.
FOR ESC SETTINGS CLICK HERE
Features:
- High quality Neodymium Magnets with a heat resistance up to 150 degree C.
- Specialized wires,heat resistance up to 250 degree C.
- Precise balanced.
- High performance stator metal sheet.
- Optimized ventilation.
- High quality NMB bearings.
- Marked leading high efficiency up to 92%.
- Superb quality and machining of CNC parts.
- 100% hand-wound.
SHAFT TYPE SELECTION BASED ON THE FOLLOWING TYPES A, B
Technical Data
Xnova 4030 Series-470KV
$ 245.00
Xnova 4030-470KV 3Y
Xnova brushless high performance outrunner motor for 600-700 helicopters for 3D flying in 12-14S or very good flight times and efficiency on 10S.
FOR ESC SETTINGS CLICK HERE
Features:
- High quality Neodymium Magnets with a heat resistance up to 150 degree C.
- Specialized wires,heat resistance up to 250 degree C.
- Precise balanced.
- High performance stator metal sheet.
- Optimized ventilation.
- High quality NMB bearings.
- Marked leading high efficiency up to 92%.
- Superb quality and machining of CNC parts.
- 100% hand-wound.
SHAFT TYPE SELECTION BASED ON THE FOLLOWING TYPES A, B
Technical Data
Xnova 4030 Series-560KV
$ 245.00
Xnova 4030-560KV 2.5Y
Xnova brushless high performance outrunner motor for 600-700 helicopters for 3D flying in 10-12S Peak efficiency occurs at ~65A on 10s. For sport flying or longer flight times, the 3Y is more suited.
FOR ESC SETTINGS CLICK HERE
Features:
- High quality Neodymium Magnets with a heat resistance up to 150 degree C.
- Specialized wires,heat resistance up to 250 degree C.
- Precise balanced.
- High performance stator metal sheet.
- Optimized ventilation.
- High quality NMB bearings.
- Marked leading high efficiency up to 92%.
- Superb quality and machining of CNC parts.
- 100% hand-wound.
SHAFT TYPE SELECTION BASED ON THE FOLLOWING TYPES A, B
Technical Data
