SAB Goblin Black Thunder 700 Green/Carbon Electric Helicopter Kit

$ 988.00

SAB Goblin Black Thunder 700 Green/Carbon Electric Helicopter Kit

ABSOLUTE POWER

Power and elegance found their perfect compromise in the Black Thunder!

This project allows to obtain extraordinary performances with batteries between 4500 and 5000mAH 12s.

In order to optimize the weight, the body is made completely out of carbon fiber and the carbon parts enhance the look.

• Main rotor diameter: 1548 mm with 650 mm size blades
• Tail rotor diameter: 305 mm with 105 mm size tail blades
• Approximate weight RTF: 5300 grams
• Cyclic Servos: Standard size (40mm) 
• Tail Servo: Standard size (40mm) 
• Typical battery setup: 12S - 5000mAh, (from 4500 to 5200) 
  
• Typical ESC setup: 160A Esc
• Typical Motor setup: 520 -535Kv 

• 690 mm ThunderBolt main blades
• 115 mm ThunderBolt tail blades
• Motor Pulley 21T
• 2 Sets Battery Tray

DIMENSION

FEATURES Goblin Black Thunder Body Black Matte Components. This new head is lighter than Standard Goblin 700 Head Main gear CNC H0405 (aluminum/delrin), Swashplate with high quality spherical bearing  Big room for ESC THUNDERBOLT blades in the Kit Boom obtained with different technology, 80 grams less than old G630 solution. Black Matte tail parts Serial Number engraved on the main plate Full carbon Canopy, New Quick Canopy release. Canopy weight 80gr less than Standard Goblin Canopy

View full product details

Jeti Duplex DS-14 Heli Carbon Diablo 2.4GHz w/Telemetry Transmitter Only Radio (w/ FREE REX R7 RX)

$ 895.00 $ 995.00

Jeti Duplex DS-14 Heli Carbon Diablo 2.4GHz w/Telemetry Transmitter Only Radio 

FREE SHIPPING on this item

 

More information (links):
* Jeti Duplex DC/DS-16, DS-14 Instruction Manual (.pdf)
* Click Here for Firmware Updates

The new Jeti DS-14 Heli transmitter allows you to create system that only includes what you actually need, but one that also gives you the opportunity for future expansion. For the first time Jetis DS-14, State-of-the-art transmitter lets you customize its software and features. Now, you only pay for features that you will actually use. Save up front on a cutting edge radio system, but keep your options open for when your needs change.

DS-14 Carbon Heli Features (Diablo Edition)

• Setup for Helicopters with smooth left throttle stick and momentary button installed at SG position.
• Custom, genuine Carbon Fiber front panel with UV stabilized acrylic clear coating.
• Solid aluminum, CNC frame finished in multi-layer automotive paint and metallic clear coating.
• State-of-the-art, upgradable firmware which gives you full freedom and complete control.
• Installed Firmware Upgrades: Flight Modes (6 Total), Gyro Settings (3 Total)
• DS-14 Carbon Heli radio system comes with transmitter aluminum case.

The DS-14 represents Jeti's new, State-of-the-art, transmitter that sets a new quality standard for the RC Industry with its revolutionary features and brand new plastic Hall Sensor Gimbals. Jeti's final touches and finishes are outstanding.

This revolutionary, digital, 14+8 (22) Channel (Upgradable from 8), 2.4GHz, frequency hopping radio system is fully designed and manufactured by Jeti Model in the Czech Republic. This is one of the most advanced radio systems on today's market. With their solid CNC aluminum case with a fully integrated antennas, a mini USB port, built-in speaker, headset jack, plastic transmitter gimbals with Hall sensors (4096 step resolution) and 4 ball bearings for precision movement, a large 320x240 backlight display and many other features the Jeti DS-14s are sure to become the new standard in transmitter performance.

One of the attractive features of the Duplex 2.4GHz line of products is it's full integration with all Duplex telemetry sensors. You can easily observe up to 20 (Upgradable) different parameters in real-time directly on the transmitter. Or, by using the JetiBox Profi (sold separately) you can see your data in parallel mode giving you and your co-pilot valuable real-time information (see video).

One of the most important features of Jeti's transmitters is the gimbal and switch function assignment flexibility. With the DS-14 you are free to fully customize your radio. You can swap switches or sticks (Mode 1-4) and the on-board computer will recognize your changes and assign functions anywhere you like. Other important upgradable functions include programmable Sounds/Alarms and even user-recordable sounds. This audible alarm feature was specifically designed to keep you informed while also keeping distractions to a minimum. We think this is the best way enhance both your enjoyment and your model safety. You can simply set a receiver battery capacity alarm for the desired capacity used and once that number is reached the system acoustically and visually gives you warnings.

Specifications and Features

• State-of-the-art, upgradable firmware which gives you full freedom and complete control.
• Solid aluminum, CNC cut transmitter case with fully integrated antennas and oversized LCD display.
• Mini USB port for firmware upgrades and PC download of telemetry data.
• Integrated speaker and 3.5mm headset jack. You can play back music and create custom voice alarms (upgrade required). The options are virtually unlimited.
• Upgradable, logical switches can be added that let you execute a complex string of control events with the simple flip of a switch.
• 9-point, programmable curve mixes for all 14 digital proportional channels. (upgrade required)
• You can set up not just dual, but triple rates.
• Pre-programmed servo setups for nearly every type of wing, tail and swash plate imaginable.
• Unlimited use of the on-board 4GB SD card memory.
• Fully integrated logical switch functions (upgrade required). If you need to drop bombs only if your throttle is at 50% and bay doors are open, with this system you can. Your programming/mixing options are virtually unlimited.
• Fully integrated digital telemetry. View, process and store all your telemetry data and even wirelessly program any of the Duplex EX sensors.
• Create, manage and program all alarms. Enhance safety for both yourself and your model. Monitor your temperature, speed, battery voltage, receiver battery capacity and much more.
• All switches and channels are completely moveable and assignable. Want to move throttle to the right slider or switch several functions to just one stick? With the Jeti radio system, yes you can. Basically, you can program any stick, dial, switch or slider to generate any output you choose.
• Up to 6 programmable timers. You can easily set a timer for your overall flight time, a model memory timer for the motor run of a specific model, and any number of count down/stopwatch timers that can be activated any number of ways.

The new Jeti DS-14 Basic transmitter allows you to create system that only includes what you actually need, but one that also gives you the opportunity for future expansion. For the first time Jetis DS-14, State-of-the-art transmitter lets you customize its software and features. Now, you only pay for features that you will actually use. Save up front on a cutting edge radio system, but keep your options open for when your needs change.

For Upgradable Features Visit: swshop.jetimodel.com

List of Upgradable Features for DS-14US Heli Carbon Diablo

· Channels (6 more)
· Accelerometers
· Free Mixes (7 more)
· Graphs
· Audio Player
· Logical Switches
· Remote Commands
· Sequencer
· Timers (3 more)
· Telemetry Values (10 more)
· Sounds on Events (5 more)
· Alarms (10 more)
· Voice Output
· Servo Balancer
· Function Curves
· Throttle Limiter
· Variometer
· Telemetry Controls

35.00 EUR
25.00 EUR
25.00 EUR
12.00 EUR
12.00 EUR
12.00 EUR
12.00 EUR
12.00 EUR
12.00 EUR
12.00 EUR
12.00 EUR
12.00 EUR
25.00 EUR
25.00 EUR
12.00 EUR
12.00 EUR
12.00 EUR
35.00 EUR

Included: (1) Jeti Duplex DS-14 Transmitter (1) Jeti Transmitter Aluminum Case (1) 110-230V Wall Power Supply (1) Tx Battery Li-poly 5200mAh (1) Mini USB to USB PC Cable

Video:

View full product details

Jeti Duplex DS-16 Carbon Red 2.4GHz w/Telemetry Transmitter (w/ FREE R9 RX)

$ 1,595.00

Jeti Duplex DS-16 Carbon Red 2.4 GHz w/Telemetry Transmitter Only Radio 

FREE SHIPPING on this item

More information (links):

* Jeti Duplex DC/DS-16, DS-14 Instruction Manual (.pdf)
* Click Here for Firmware Updates

The DS-16 Carbon represents Jeti's new flagship, State-of-the-art, transmitter that sets a new standard for the RC Industry. Jetis final touches and finishes are outstanding. The front panel of the system is made of genuine Carbon Fiber with UV stabilized acrylic clear coating as well as aluminum frame which is finished in multi-layer automotive paint.

This revolutionary, digital, 24 Channel, 2.4GHz, frequency hopping radio system is fully designed and manufactured by Jeti Model in the Czech Republic. This is one of the most advanced radio systems on today's market. With their solid CNC aluminum case with a fully integrated antenna, a mini USB port, built-in speaker, headset jack, metal transmitter gimbals with Hall sensors (4096 step resolution) and 9 ball bearings for precision movement, a large 320x240 backlight display and many other features the Jeti DC/DS-16s are sure to become the new standard in transmitter performance.

One of the attractive features of the Duplex 2.4GHz line of products is it's full integration with all Duplex telemetry sensors. You can easily observe up to 40 different parameters in real-time directly on the transmitter. Or, by using the JetiBox Profi (sold separately) you can see your data in parallel mode giving you and your copilot valuable real-time information (see video).

One of the most important features of Jeti's transmitters is the gimbal and switch function assignment flexibility. With the DC/DS-16 you are free to fully customize your radio. You can swap switches or sticks (Mode 1-4) and the on-board computer will recognize your changes and assign functions anywhere you like. Other important functions are programmable Sounds/Alarms and even user-recordable sounds. This audible alarm feature was specifically designed to keep you informed while also keeping distractions to a minimum. We think this is the best way enhance both your enjoyment and your model safety. You can simply set a receiver battery capacity alarm for the desired capacity used and once that number is reached the system acoustically and visually gives you warnings.

Specifications and Features

• State-of-the-art, upgradable firmware which gives you full freedom and complete control.
• Solid aluminum, CNC cut transmitter case with fully integrated antenna and oversized LCD display.
• Mini USB port for firmware upgrades and PC download of telemetry data.
• Integrated speaker and 3.5mm headset jack. You can play back music and create custom voice alarms. Options are virtually unlimited.
• Built-in, logical switches that lets you program a complex string of control events with the simple flip of a switch.
• 9-point, programmable curve mixes for 16 digital proportional channels (24 total).
• You can set up not just dual, but triple rates.
• Pre-programmed servo setups for nearly every type of wing, tail and swash plate imaginable.
• Unlimited use of the on-board 2GB SD card memory.
• Fully integrated logical switch functions. If you need to drop bombs only if your throttle is at 50% and bay doors are open, with this system you can. Your programming/mixing options are virtually unlimited.
• Fully integrated digital telemetry. View, process and store all your telemetry data and even wirelessly program any of the Duplex EX sensors.
• Create, manage and program all alarms. Enhance safety for both yourself and your model. Monitor your temperature, speed, battery voltage, receiver battery capacity and much more.
• All switches and channels are completely moveable and assignable. Want to move throttle to the right slider or switch several functions to just one stick? With the Jeti radio system, yes you can. Basically, you can program any stick, dial, switch or slider to generate any output you choose.
• Unlimited number of programmable timers. You can easily set a timer for your overall flight time, a model memory timer for the motor run of a specific model, and any number of count down/stopwatch timers that can be activated any number of ways.

Included:
(1) Jeti Duplex DS-16 Transmitter Carbon Line
(1) Jeti Transmitter Aluminum Case
(1) 110-230V Wall Power Supply
(1) Tx Battery Li-poly 5200mAh 3.7V (1S2P)
(1) Mini USB to USB PC Cable


Video:

View full product details

Xnova 1806-2300KV FPV 4 Motor Combo

$ 95.00

Xnova 1806-2300KV supersonic racing FPV motor combo

View full product details

Xnova 2204-2300KV FPV 4 Motor Combo

$ 100.00

Xnova 2204-2300KV supersonic racing FPV motor combo

View full product details

Xnova 2204-2600KV FPV 4 Motor Combo

$ 100.00

Xnova 2204-2600KV supersonic racing FPV motor combo

View full product details

Jeti Duplex EX R7 REX 2.4GHz Receiver w/Telemetry

$ 79.00

Receiver	Duplex EX R7 REX EPC
Manufacturer	Jeti Model
Special Features	Spread-Spectrum/Frequency Hopping
Modulation	2.4GHz w/Telemetry Data
Upgradeable	Via USB or JetiBox
Satellite Rx Support	Yes/2 (E1, E2)
Channels	7
Range	Full Range
Voltage	3.2-8.4V (2S Li-poly)
Dimensions	42mm x 28mm x 11mm
Weight	13g

Duplex revolutionary, fully digital 2.4GHz, frequency hopping radio system is fully designed and manufactured by Jeti Model in the Czech Republic. We are excited to introduce two brand new lines of REX and REX Assist Jeti Duplex 2.4GHz Receivers with built-in revolutionary features: Internal Data Telemetry Logging (Black Box), Integrated Multi (3) Input/Output Telemetry & EX Bus Expander, and New 32 Bit Microprocessors (No limits for Future Firmware Upgrades). All Jeti receiver features wirelessly programmable failsafe and integrated digital telemetry (Rx Voltage, Signal Quality).

New Jeti REX line of programmable receivers has been developed to take full advantage of multi-port (Ext, E1, E2), multi communication protocol (EX Bus, UDI 12/16, PPM) configuration and fully implement Duplex EX Bus (Device Manager) or third party devices that use EX Bus for telemetry and programming integration.

One of the most attractive features of the Duplex 2.4GHz line of products is the full integration with all Duplex telemetry sensors. You can easily observe up to 40 different parameters in real-time directly on the transmitter. Or, by using the JetiBox Profi (sold separately) you can see your data in parallel mode giving you and your copilot valuable real time information (see video).

With any of the Duplex 2.4GHz receiver you can simultaneously monitor all of your sensor data using the Duplex JetiBox Profi or any of the Jeti 2.4GHz Transmitters.

More information (links):
* Instruction Manual (.pdf)
* Instruction Flow Chart (.pdf)
* Click Here for Firmware Updates

Port Configurations (Rx Firmware REX 1.00):
Standard: 1-7 Servo, E1/E2 Servo/Telemetry/Satellite, Ext Telemetry/USB Programming
PPM/Servo: 1-7 Servo, E1/E2 Servo/Satellite/PPM, Ext Telemetry/USB Programming
EX Bus/Servo: 1-7 Servo, E1/E2 Servo/Satellite/EX Bus, Ext Telemetry/USB Programming
UDI/Servo: 1-7 Servo, E1/E2 Servo/Satellite/UDI, Ext Telemetry/USB Programming

Video:

View full product details

MKS HBL380

$ 189.99

MKS HBL380

Ultra Torque Servo 

• Perfect Servo for large-scale airplane, jet and 1/8, 1/5 scale buggy.
• Ideal for CCPM on 700~800 class helicopter.
• Ultra torque, incredible efficiency, and low power consumption.
• CNC Machined Metal Case Design for Exceptional Cooling.
• HD 4096 Resolution, 0.008ms Dead Band.
• Superior Holding Torque, Japanese Brushless Motor.
• Output performance to the top level – smoother, faster, and more efficient.
• Special design for high voltage 2s LiPo operation.
• Extremely strong Chrome-Titanium alloy gear, providing high level of durability that will survive heavy use.

  Torque: 31 kg-cm (6.0V)  /  39 kg-cm (7.4V)  /  41 kg-cm (8.2V)

  Speed: 0.114 s (6.0V)  /  0.092 s (7.4V)  /  0.082 s (8.2V)

  Weight: 73 g

View full product details

Jeti Central Box 200 Power Distribution Combo w/Magnetic Switch & R3/RSW Receivers (2)

$ 265.00

The Central Box 200 is a switchboard designed for the complete management of servos in a model with an emphasis on safety. The Central Box has a unique design that provides overload protection at each servo output. The Central Box can manage up to two batteries and fully supports the Jeti EX telemetry system. Up to two receivers with serial (PPM, EX Bus) output as well as two power batteries can be connected at the same time to the Central Box for complete Power & RF signal redundancy.

With Jeti Duplex 2.4GHz DC/DS transmitters, the full potential of the Central Box can be used, such as an easy way to wirelessly configure the Servo Outputs, EX Telemetry, Fail-Safe Setting or Fast Servo Response.

Included:
(1) Jeti Central Box 200
(2) Jeti Duplex EX R3/RSW 2.4GHz Receiver
(1) Magnetic Switch
(1) Magnetic Key

JetiBox Configuration
The JetiBox monitor/programmer can be used for parameter setting and retrieving data. After connecting to the Central Box (Ext1), a startup screen appears that contains identification of the device in the first line of the JetiBox display.

Power Supply
The power batteries are connected to the Central Box using MPX connectors. The Central Box allows two batteries to be connected. During use, the power is actually supplied from the battery with the higher voltage. If the voltage is the same, the power can be used from both batteries at the same time. When the voltage of the batteries is different, the power is not shared and each pack is isolated from the other. This allows you to use batteries of different capacity, number of cells and chemistry type. If the power for the Central Box is provided only from one battery, it can be connected via battery (BATT1) Input.

Magnetic Switch (Included)
The magnetic switch is used to turn the Central Box ON/OFF and is connected to a separate slot labeled "Switch". To turn on the Central Box using the magnetic switch it is necessary to hold the supplied magnet (key) to the target so that the key and the target on the magnetic switch are properly oriented.

Wireless Switch R3/RSW (Optional)
State-of-the-art device that sets Jeti as a leading designer and manufacturer of radio control systems. Wireless power switch is fully integrated into the 2.4GHz radio system. For first time your receiver can be turned ON/OFF with simple flipping of the switch wirelessly from the Jeti DC/DS transmitters.

Central Box 200 installations done by Jeti USA Team pilot Joe Smith & our friend C.Brent.

 

Features:
- Control Management with Configurable Servo Output
- Power Distribution with Two Independent Inputs
- Firmware Updatable via Jeti USB Adapter
- Jeti Duplex EX Bus or PPM Compatible
- Wirelessly Programmable Using DC/DS Tx Device Explorer
- Independent Receiver Signal Inputs (SAT1, SAT2)
- Up to 15x Servo Outputs with Overload Protection
- Up to 3x Telemetry Sensors Inputs (Ext1, Ext/14, Ext/15)
- Input for Included Magnetic or Optional Wireless Switch
- Input Voltage: 3.5-15V
- Output Current: 2x 10A Continues/90A Peak
- Dimensions/Weight: 62mm x 38mm x 16mm/30g

More information (links):
* Instruction Manual (.pdf)
* Menu Diagram (.pdf)

Video:

	Fail-Safe Setting Switches ON/OFF of the Fail-Safe function. If the Fail-Safe function is deactivated, there is no signal generated in any Central Box outputs at the signal loss. If you activate the Fail Safe function, you can also select how the Central Box responds at signal loss for each of the individual outputs.
	Servo Mapping Servo No. - Assigning outputs of the transmitter to the Central Box outputs. Group - Assigning specific output to the group of output impulses that will be generated from the receiver in the same time.
	Duplex Telemetry Temperature - Temperature of the Central Box Shorted Outputs No. - Number of Overloaded Outputs Voltage - Voltage of Individual Outputs of the Central Box Current - Current Drawn from the Battery Capacity - Capacity Taken from the Batteries

View full product details

Jeti Duplex EX R3 REX 2.4GHz Receiver w/Telemetry

$ 69.00

Jeti Duplex EX R3 REX 2.4GHz Receiver w/Telemetry

Receiver	Duplex EX R7 REX EPC
Manufacturer	Jeti Model
Special Features	Spread-Spectrum/Frequency Hopping
Modulation	2.4GHz w/Telemetry Data
Upgradeable	Via USB or JetiBox
Satellite Rx Support	Yes/2 (E1, E2)
Channels	3
Range	Full Range
Voltage	3.2-8.4V (2S Li-poly)
Dimensions	40mm x 22mm x 7mm
Weight	6g

Note: This item is not for use in the US and Canada (Pending FCC/IC Certification)

Duplex revolutionary, fully digital 2.4GHz, frequency hopping radio system is fully designed and manufactured by Jeti Model in the Czech Republic. We are excited to introduce two brand new lines of REX and REX Assist Jeti Duplex 2.4GHz Receivers with built-in revolutionary features: Internal Data Telemetry Logging (Black Box), Integrated Multi (3) Input/Output Telemetry & EX Bus Expander, and New 32 Bit Microprocessors (No limits for Future Firmware Upgrades). All Jeti receiver features wirelessly programmable failsafe and integrated digital telemetry (Rx Voltage, Signal Quality).

New Jeti REX line of programmable receivers has been developed to take full advantage of multi-port (Ext, E1, E2), multi communication protocol (EX Bus, UDI 12/16, PPM) configuration and fully implement Duplex EX Bus (Device Manager) or third party devices that use EX Bus for telemetry and programming integration.

One of the most attractive features of the Duplex 2.4GHz line of products is the full integration with all Duplex telemetry sensors. You can easily observe up to 40 different parameters in real-time directly on the transmitter. Or, by using the JetiBox Profi (sold separately) you can see your data in parallel mode giving you and your copilot valuable real time information (see video).

With any of the Duplex 2.4GHz receiver you can simultaneously monitor all of your sensor data using the Duplex JetiBox Profi or any of the Jeti 2.4GHz Transmitters.

More information (links):
* Instruction Manual (.pdf)
* Instruction Flow Chart (.pdf)
* Click Here for Firmware Updates

Port Configurations (Rx Firmware REX 1.00):
Standard: 1-3 Servo, E1/E2 Servo/Telemetry/Satellite, Ext Telemetry/USB Programming
PPM/Servo: 1-3 Servo, E1/E2 Servo/Satellite/PPM, Ext Telemetry/USB Programming
EX Bus/Servo: 1-3 Servo, E1/E2 Servo/Satellite/EX Bus, Ext Telemetry/USB Programming
UDI/Servo: 1-3 Servo, E1/E2 Servo/Satellite/UDI, Ext Telemetry/USB Programming

Video:

View full product details

SAB Goblin 380 Kyle Stacy Edition Helicopter Kit

$ 420.00

SAB Goblin 380 Kyle Stacy Edition Helicopter Kit

SG382 - SAB GOBLIN 380 KYLE STACY EDITION (With Main and Tail Blades)

The Goblin 380 Kyle Stacy Edition is the Goblin 380 with the upgrade canopy yellow (H0559-S) and with 3 blades Head (H0640-K)

In the Kit also the new Carbon Fiber Landing Gear Style (H0644-S)

General info about Goblin 380:

http://www.helidirect.com/sg381-goblin-380-color-2.html

Kyle Stacy flying the Goblin 380 KSE

https://www.youtube.com/watch?v=GSQCYEAPF08

Kyle Stacy and the Kyle Stacy Edition Family

https://www.youtube.com/watch?v=G3HWRJofwEA

Kyle Stacy introduce the Goblin 380 KSE

https://www.youtube.com/watch?v=qUsUD6J6P4s

Kyle Stacy said about Goblin 380 KSE:

The Goblin 380 Kyle Stacy Edition is an evolution of the original Goblin 380. It includes a 3 bladed rotor head that is based off of a DFC design. A very simple and robust setup makes it a nearly maintenance free model. The rotor head offers many of the characteristics that come from the other Kyle Stacy Edition kits. Such as stability, agility and power, giving you incredible performance in such a small package. The yellow and black color scheme not only looks great, but is incredibly visible in all orientations in the sky. I hope you have as much fun with the Goblin 380 Kyle Stacy Edition as I do!

View full product details

BavarianDEMON CORTEX PRO

$ 299.00

Bavarian Demon CORTEX PRO

GET THE PRO VERSION

Since the first release, CORTEX combines a demonic and a happy-go-lucky flying enjoyment for the ambitioned RC pilot. High-quality, reliable, versatile, universally ready for operation – that’s what this extra class in 3-axis stabilization systems is known for a long time.

The CORTEXpro opens up the next generation gate with even more demonic features and fun factors. Based on the latest 32-bit CPU technology and in addition to all state-of-the-art features, the brand new CORTEXpro offers a bunch of great news for more comfort in flight and setup. The combination of easy programming and basic setup without software, automatic signal type detection, compatibility with invariably all common analog and digital serial protocols, as well as the dual and redundant serial input and output option, is absolutely unique.

Let the DEMON take control over your cockpit and test the new CORTEXpro now! More fun, more safety, more comfort – presumably only your breath will backpedal…

FEATURES

Multi protocol input and output Latest 32-bit technology Up to 24 channels, 16 stabilized Receiver redundancy for 2 inputs iOS & Android App for fine tuning Easy teach-in via TX No software needed

WHAT'S IN THE BOX

bavarianDEMON CORTEX PRO incl. adhesive pads Mini USB cable  Connection cable harness Jumper for programming

SOFTWARE The mobile app software (Android and iOS) will appear shortly. We will keep you up to date. Software (Win / MacOS) AXON & CORTEXPRO SOFTWARE This software is suitable for AXON & CORTEXPRO. It features an auto-detection of the connected device, and can be set to English or German. DOWNLOAD: bavarianDEMON_ACP_1.02_setup.exe (17,4 MB) V1.02 update details: Mandatory for CORTEXpro firmware V1.1/1100. This enables additional configuration parameter and options with the CORTEXpro via software. Note: This software will automatically update any CORTEXpro to firmware V1.1 when connected. Any previous configuration will not be changed or deleted from the device. Apps (iOS / Android) at the relevant stores.   Related Products Bavarian Demon ACP Cable Loom  Foam Tape Acro ACP Foam Tape Soft ACP

View full product details

3Digi

$ 110.00

3Digi

The revolutionary electronic stabilization system for flybarless (FBL) RC helicopters

3DIGI is ready to use and supports a wide range of interfaces. Connection for setup and tuning can be direct to a computer via a Micro-USB cable (user supplied) or an Android device (using an optional external module) via Bluetooth.

View full product details

HOBBYWING PLATINUM PRO ESC - 160A-HV V4

$ 449.99 $ 560.00

HOBBYWING PLATINUM PRO ESC - 160A-HV V4

Platinum 160A-HV V4 Programming parameter

 

View full product details

Xnova 2216 Series- 4100 KV

$ 85.00

Xnova XTS 2216-4100kv 6P

FOR ESC SETTINGS CLICK HERE 

Features:

• High quality Neodymium Magnets with a heat resistance up to 150 degree C.
• Specialized wires,heat resistance up to 250 degree C.
• Precise balanced.
• High performance stator metal sheet.
• High quality NMB bearings. 
• Marked leading high efficiency up to 88%.
• Superb quality and machining of CNC parts.
• Improved torque and power output.

Technical Data

View full product details

HOBBYWING PLATINUM PRO ESC - 200A-HV V4

$ 449.99 $ 720.00

HOBBYWING PLATINUM PRO ESC - 200A-HV V4

View full product details

Xnova 3215 Series 380 Size - 930KV TAREQ SPECIAL EDITION

$ 150.00

Xnova 3215 Series 380 Size - 930KV TAREQ SPECIAL EDITION 10P

Xnova brushless high performance outrunner motor designed for  EXTREME 3D flying AND still good flight times, specially made for your  380 size helicopter, like SAB Goblin or MSH Protos 380, where highest power to weight ratio is important. We carefully optimized and tested this Motor with  TAREQ ALSAADI under extreme conditions.

FOR ESC SETTINGS CLICK HERE 

Features:

1. High qual. Neodym Mag.heat res. up to 150 degree C.
2. Specialized wires,heat resistance up to 250 degree C.
3. Precise balanced.
4. High performance stator metal sheet.
5. Very large High quality NMB bearings.
6. Marked leading high efficiency up to 91%.
7. Cooler running.
8. Superb quality and machining of CNC parts.
9. Handwound single strand wire.

Technical Data:

View full product details

BavarianDEMON AXON

$ 349.00

Bavarian Demon AXON

Especially developed for all kind of RC helicopter, the AXON combines all State-of-the-Art features, without leaving a simple handling behind – primarily including the soon available Android- & iOS-Apps via Bluetooth. As one of the most important details when out at the flying field is the intuitive and easy handling and tuning of all parameter without the need of a PC or separate programming unit.

The AXON will convince with its ultra-precise flight control, latest 32-bit technology, up to 3 bank sets, intelligent vibration analysis and, for all who do not want to miss a single thing, now including a governor function for electric and gaser/nitro. Moreover the AXON is compatible with all common analog and digital serial Tx/Rx protocols. This innovative technology, available to all RC pilots out there, comes in a brand new X-housing made of fire-red aluminum. It all simply feels great, and in the twinkling of an eye you will find yourself on a new level of performance.

TEAM PILOT MILES DUNKEL PRESENTS THE NEW AXON FLYBARLESS SYSTEM

Related Products

Bavarian Demon ACP Cable Loom	Foam Tape Acro ACP	Foam Tape Soft ACP

View full product details

BavarianDEMON 3SX

$ 189.00 $ 379.00

The 3SX for remote controlled helicopters comes with the patented horizon mode and the world's most unique rescue mode which makes flying significantly more secure. Perfect for beginners as well as professional pilots who would like to set themselves new goals. You can learn how to fly easily ans safely. You can test and train new 3D manoeuvres. You control your RC helicopters without worrying about the safety - even if you do lose control at times. This is because the bavarianDEMON 3SX rescues your valuable RC helicopter from all flight manoeuvres at the touch of a button (such as tic-toc or piro-flip) via an automatic pitch action which enables the helicopter to shoot upwards. Both the stabilisation strength and turning the respective horizontal mode on and off takes place via an auxiliary channel from the sender.

View full product details

BavarianDEMON CORTEX

$ 249.00

3-AXIS GYRO CORTEX

POWER FOR EVERYTHING AND FOR EACH TYPE OF RC AIRPLANE

Ground-breaking 3-axis stabilization system. Gyro CORTEX has a high-quality, is reliable and universal. Whether a Parkflyer, 3D Acro model or turbine jet, this gyro fits every RC aircraft. 100% reliable sensors. The latest soft-ware algorithms. Everything in more remarkably small and CNC-milled aluminium housing. Together, these features bring the gyro to a whole new level. And they will do the same for your RC airplane. Whatever you do, you will notice the difference - your remote controlled airplane is in the air, starting and landing work perfectly and strong or gusty winds are no longer a problem.

The CORTEX - AIRCRAFT 3-axis stabilization system for fixed wing model aircraft. Extremely smooth flight characteristics - even in strong and gusty wind.

Note: USB cable is not included!

View full product details

SAB Goblin 380 Kyle Stacy Edition Helicopter Kit

$ 420.00

SAB Goblin 380 Kyle Stacy Edition Helicopter Kit

SG382 - SAB GOBLIN 380 KYLE STACY EDITION (With Main and Tail Blades)

The Goblin 380 Kyle Stacy Edition is the Goblin 380 with the upgrade canopy yellow (H0559-S) and with 3 blades Head (H0640-K)

In the Kit also the new Carbon Fiber Landing Gear Style (H0644-S)

General info about Goblin 380:

http://www.helidirect.com/sg381-goblin-380-color-2.html

Kyle Stacy flying the Goblin 380 KSE

https://www.youtube.com/watch?v=GSQCYEAPF08

Kyle Stacy and the Kyle Stacy Edition Family

https://www.youtube.com/watch?v=G3HWRJofwEA

Kyle Stacy introduce the Goblin 380 KSE

https://www.youtube.com/watch?v=qUsUD6J6P4s

Kyle Stacy said about Goblin 380 KSE:

The Goblin 380 Kyle Stacy Edition is an evolution of the original Goblin 380. It includes a 3 bladed rotor head that is based off of a DFC design. A very simple and robust setup makes it a nearly maintenance free model. The rotor head offers many of the characteristics that come from the other Kyle Stacy Edition kits. Such as stability, agility and power, giving you incredible performance in such a small package. The yellow and black color scheme not only looks great, but is incredibly visible in all orientations in the sky. I hope you have as much fun with the Goblin 380 Kyle Stacy Edition as I do!

View full product details