$ 699.00

Heli Professional soXos Strike7

Item Description

soXos Strike7, all-rounder of the 700 class. 

«A must for every pilot!»


Because of the sophisticated mechanics, the soXos Strike7 achieves maximum rigidity with minimum take-off weight. This allows you to steer the helicopter precisely through the toughest 3D maneuvers and it stays where you want it. Thanks to the light mechanics you can have a lot of fun with the Strike7 even on low RPM flights. 

So that you can recognize the soXos Strike7 well in every attitude, a light hood with clearly visible colors is used.


Features soXos Strike7:
  • Made from one piece milled aluminum main frame for minimal weight and maximum rigidity. 
  • The intelligent design allows easy maintenance and replacement of individual components. 
  • With the battery quick change system, the batteries can be changed easily and quickly. 
  • Thanks to the large battery compartment, Lipos up to 12S-6500mAh can be used. 
  • A robust helical gear made of high-strength plastic ensures optimum power transmission.





  • All common engines of the 700 to 850 class can be installed, with 6mm or 8mm shaft diameter. 
  • The motor pinion is additionally guided at the bottom by a ball bearing. Thus motors with any wavelength can be installed. (At least 20mm, maximum 60mm) 
  • The gear ratios go from 1: 7.94 with 19-pinion, to 1: 10.06 with 15-pinion.




  • Strong and short rotor head for maximum precision in extreme maneuvers. 
  • Specially developed rotor head damping for highest precision.



  • Damped tail rotor housing, which allows a vibration-poor operation. 
  • Direct and play-free control of the tail servo to the tail rotor through the torsion bar. 
  • The hood is held by strong magnets. A simple assembly is guaranteed. 
  • High quality of the rear timing belt which prevents a static charge.





Kit contents:

  • SoXos Strike7 Kit 
  • Engine sprocket 16z / 6mm for engines of 520-560KV / 12S 
  • Battery tray
  • Canopy red / yellow 
  • Instructions

Recommended components (not included in KIT):

  • Flybarless system 
  • Regulator: 12S from 130A 
  • Engine: 700 - 850 class with 450 - 560KV / 6mm or 8mm shaft (maximum motor size: Ø 63mm, height 64mm) 
  • Swashplate servos 3pcs .: min. 14kg / cm 
  • Tail servo: min. 6kg / cm 
  • Rotor blades 685mm - 710mm - Tail 
  • Tail blades: 105mm - 115mm 
  • 12S battery 4,000 - 6,500mAh (maximum size drive battery: width 62mm, height 68mm, length 350mm) 
  • Transmitter / Receiver

Gear ratios   (pinions are available for 6mm or 8mm motor shafts)

15 teeth:  10.06 
16 teeth:    9.43 (included in the kit for 6mm shaft) 
17 teeth:    8.87 
18 teeth:    8.38 
19 teeth:    7.94

Technical description

Weight of the mechanism without RC components & rotor blades: about 2,200 g 

  • Weight of the mechanism without drive battery : about 3750 g - main rotor diameter: about 1,563 mm with 690mm leaves. 
  • Length: 1,340mm 
  • Height: 340mm

Customer Reviews

Based on 4 reviews Write a review