Door sequencer: freely programmable outputs with set-up assistant
Servo-Match function: servo centre, end-points and reverse for all 15 servo outputs
SRS: Serial Receiver System provides the facility to use receivers with serial interface: Futaba S-Bus, Spektrum DSM2 und DSMX, Jeti UDI, Multiplex M-Link, HoTT and JR X-BUS
Unrestricted channel assignment for all 15 PowerBox outputs
Graphic OLED screen with 128 x 64 pixels
Extremely user-friendly menu-based programming using the SensorSwitch
Signal amplification and interference suppression for all 15 outputs
Flight recorder, recording of lost frames and fail-safe events
Variable frame rate, range 12ms – 21ms
16-bit processors for fast, high-resolution signal processing
Double-regulated output voltages for receivers and servos
regulated output voltage 5.9V or 7.4V
Connection facilities for Futaba, Jeti, Spektrum, HoTT, JR and Multiplex MSB downlink bus systems
Direct transmission of the battery informations, receiver data and GPS data to the transmitter
Separate voltage display for each battery
Minimum value memory alerts the user to voltage collapses
Large-area heat-sinks for high regulator performance
Regulator monitoring, regulator error indicator
Support for three battery types: LiPo/LiIon, NiMh/NiCd, LiFePo
Suppression of any servo feedback currents which may occur
Updateable with PowerBox Systems USB Interface or BlueCom adapter
4.0V - 9.0V
2S LiPo/LiIon, 2S LiFePo, 5S NiCd/NiMH
Current drain Power-on state
99mA (with OLED)
Current drain Standby
Maximum load current
5.9V or 7.4V regulated
Supported RC systems
Jeti, Futaba, Spektrum, HoTT, M-Link, JR Propo
Programmable servo outputs
Servo signal resolution
Signal frame rate
12ms, 15ms, 18ms, 21ms
Integral gyro system
Attitude assist and Normalmode
Gyro sensor type
Number of sensor axes
Integral door sequencer
Supported telemetry systems
Jeti, Futaba, Spektrum, HoTT, M-Link, JR Propo
93 x 67 x 19 mm
Weight Sensor Switch
Weight of LCD screen
-30°C bis +75°C
PowerBox Mercury SRS
3 Patchwires 3-pole, 200mm
8 mounting screws
Optional: GPS Sensor (Order No.: 4110)
The PowerBox Mercury SRSis a new power management system which combines all the experience and findings we have gained over the last few years, together with customer requests, in a single compact unit. Never before has so much functionality been crammed into such a small space!The Mercury SRSis ideal for any application requiring an airborne system which provides an uncompromising level of high performance. IntegraliGyro, dual receiving system, telemetry, door sequencer and servo matching are just a few of the highlights which this small, lightweight device provides.
In its development we paid particular attention to simplicity of operation. For example, the integral Assistant guides you through the entire basic setup procedure. Channel assignments and gyro settings are entered in just a few minutes with the help of the external OLED screen. Thanks to the newsix-axis sensor, the unit learns its installed orientation when the owner simply raises or lowers the model's tail. The user enters the model type and desired method of working for theiGyro: for example, it is possible to select automatic torque roll, thrust vector control or various settings with and without attitude assist function.
One highlight is the iGyro'snew Test-fly Assistant: a combination of theiGyro 3eand theiGyro SRSreduces the in-flight setup procedure to a single rotary knob. Two or three passes suffice to complete the gyro adjustments, and the various flight phases can be called up by a switch, as previously defined using theSetup Assistant.
As with theRoyal SRS, an optional addition is the provenGPS II, which provides automatic gyro gain adjustment according to the model's airspeed.
To ensure maximum security, two receivers (four satellites with Spektrum systems) can be connected to the installedSRS. Battery, receiver and GPS data are available for telemetry with virtually all radio control systems.
An integral Assistant is also available for setting up thedoor sequencer. Any modeller who knows how tiresome the adjustment procedure can be with conventional door sequencers will be surprised how quick it can be to set up a retract system including four wheel doors; it takes just a few minutes.
Theservo match functionis available for all outputs. This facility enables various functions - such as the left and right landing flaps - to be controlled using just one channel. It is also used to synchronise multiple servos operating on a single control surface. Incidentally, the servo output assignment is also pre-defined using the Setup Assistant. The assignment varies according to the model type you select; multiple outputs can be assigned per channel, and the system 'learns' the landing flap and throttle channels. The powerful 16-bit processor and the system's update facility guarantee a future-proof device; updates with new functions can be installed at any time usingPowerBox Terminalor ourBlueCom adapter.PowerBoxpilots know: their systems always reflect the latest state of technology!