AMP Connector for MULTI SERVO/CONNECTION (12) PIN
These are AMP Connector automotive grade use MIL-spec plugs that have been carefully designed to answer the problem of connecting multiple high torque digital servos, electric gear, and LEDs through one connector.
It features an ultra-high surface copper gold plated pin system that will sustain 15 A continuous at 8V and 20A burst for 5 seconds per pin.
This connector features a gold plated surface that is 10 times larger than a standard 0.1" pin, with higher quality and thicker gold plating surface, to twice the thickness of regular pins, allowing a very high number of connection/ disconnection cycles and low electrical resistance in all vibration modes.
The crimping tabs are dimensioned for cables of 16 to 20 AWG and were specified to be compatible with a universal ratchet crimping tool (possible soldering require) or a High-Grade professional Pro Crimp tool.
The housings are carbon fiber reinforced PEEK, melting point rated at 350 degrees C.
Complies to MIL-STD-202
Rated for 5000 connection/ disconnection cycles.
Temperature rising@15A per pin: 20c for continuous use at 8V.
The flange mounting female housing has 2 convenient tabs to fasten it on the side of the fuselage.
The male plug is polarized and clips in position.
What it's in the box:
- 1x AMP plug housing FEMALE
- 1x AMP plug housing MALE
- 12x Pins FEMALE
- 12x Pins MALE
Each plug set is sold with a male housing, female housing, corresponding number of female pins and male pins plus one extra pin of each.
A pin extractor tool is also available by clicking on the image below.